The pursuit of excellence,enjoy the perfect result,with my true service,in your sincere smile —— the pursuers

Product > ELECTRIC PUMP SERIES > PUMP SERIES

AUJET Series

AUJET Series

Introduction
The automatic booster systems consists of a water pump, a membrane tank, a pressure gauge and a pressure switch. The pressure tank with a non-toxic rubber membrane, or called pressure vessel, has been pre-filling with air pressure of about 0.12Mpa before leaving the factory. These system give suitable mains water pressure as required by modern domestic appliances and industrial applications, and will ensure enough water to supply all user outlets. For details of the pump construction, please refer to the relevant pages this catalogue. These pumps should be installed in a covered area, protected against the weather.
Motor:
Asynchronous, two poles                          .IP 44 protection.                 
Class F insulation.                                Continuous operation.
Single phase version built-in thermal protection
 
Technical Data
MODEL
Power
(w)
Ampere(v)
1~220
Speed
(r.p.m)
Q.Max.
(L/min)
S.head(m)
Pige dia.
(mm)
P.S witch (kgf/cm2)
ON
OFF
AUTOJET-60S
460
2.5
2850
46
9
25x25
1.4
2.6
AUTOJET-80S
600
3.6
2850
48
9
25x25
1.4
2.6
AUTOJET-100S
750
4.8
2850
50
9
25x25
1.4
2.6